081-6555794

sale@falco.co.th

ส่งฟรี!

(1 customer review)

Aruba AP-535  Indoor Access Points

AP-535 High speed. High performance indoor Wi-Fi 6 APs
Connectivity across high-density deployments such as larger office spaces, training and meeting facilities, and hospitals. Up to 2.97 Gbps maximum real-world speed and maximum of 1,024 associated clients per radio.

* ราคายังไม่รวมภาษีมูลค่าเพิ่ม 7%
  • สอบถามราคาพิเศษเพิ่มเติม
  • ขอราคางาน Project
  • ซื้อเฉพาะบริการติดตั้ง
  • งาน Service และ MA

Tel. 098-462-2266

        081-655-5794

        063-235-9985

       

Line: @falcoshop

Email: sale@falco.co.th

Description

Aruba AP-535 Specifications

  • Aruba AP-535 type: Indoor, dual radio, 5GHz and 2.4GHz 802.11ax 4×4 MIMO
  • 5GHz radio: Four spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with individual 4SS HE80 (or 2SS HE160) 802.11ax client devices, or with four 1SS or two 2SS HE80 802.11ax MU-MIMO capable client devices simultaneously
  • 2.4GHz radio: Four spatial stream Single User (SU) MIMO for up to 1,150Mbps wireless data rate with individual 4SS HE40 802.11ax client devices or with two 2SS HE40
    802.11ax MU-MIMO capable client devices simultaneously
  • Support for up to 1,024 associated client devices per radio* (typical recommended limit for active clients is 200), and up to 16 BSSIDs per radio
  • AP-535: Four integrated dual-band downtilt omni- directional antennas for 4×4 MIMO with peak antenna gain of 3.5dBi in 2.4GHz and 5.4dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
    • A mix of horizontally and vertically polarized antenna elements is used
    • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 1.9dBi in 2.4GHz and 3.5dBi in 5GHz.
  • E0, E1: HPE SmartRate port (RJ-45, maximum negotiated speed 5Gbps)
    • Auto-sensing link speed (100/1000/2500/5000BASE-T) and MDI/MDX
    • 2.5Gbps and 5Gbps speeds comply with NBase-T and 802.3bz specifications
    • POE-PD: 48Vdc (nominal) 802.3af/at/bt POE (class 3 or higher)
    • 802.3az Energy Efficient Ethernet (EEE)
  • Link aggregation (LACP) support between both network ports for redundancy and increased capacity
  • POE power can be drawn from either port (single source, or set to prioritize) or both ports simultaneously (set to combine) When set to prioritize, the AP draws power from E0 and may failover to E1.
  • DC power interface: 48Vdc (nominal, +/- 5%), accepts 1.35mm/3.5mm center-positive circular plug with 9.5mm length
  • USB 2.0 host interface (Type A connector)
    • Capable of sourcing up to 1A / 5W to an attached device
  • Bluetooth 5.0 Low Energy (BLE5.0) and Zigbee (802.15.4)* radio
    • BLE: up to 8dBm transmit power (class 1) and -95dBm receive sensitivity
    • Zigbee: up to 8dBm transmit power and 99dBm receive sensitivity
  • Maximum (worst-case) power consumption:
    • DC powered: 23.3W
    • POE powered (802.3bt or dual 802.3at): 26.4W
    • POE powered (802.3at, IPM disabled): 23.3W

 

Aruba AP-535 Data Sheet

Datasheet
Datasheet

 

1 review for Aruba AP-535 (JZ336A) Unified Wireless Access Point

  1. Sakda S.

    แนะนำครับ

Only logged in customers who have purchased this product may leave a review.